VENDOR MONITORING
Run Tripp Lite equipment? MayaUPS watches it over SNMP. RFC 1628 covers the readings every brand shares, and a manufacturer profile adds detail when the network card offers it. What you get depends on the UPS, the card and the firmware.
MayaUPS reads supported Tripp Lite UPS equipment two ways: the standard RFC 1628 data every brand shares, plus Tripp Lite-specific SNMP profiles for the extra detail. Supported direct USB connections go through the optional agent.
Depending on the unit and its network card, you can read status, battery charge, runtime, load, voltage, temperature and alarm conditions in plain language.
What you can read depends on the UPS model, the network card and its firmware, so confirm your exact combination first, especially before counting on manufacturer-specific readings or shutdown commands.
Review the shutdown policy, then run it while it cannot switch anything off. Once you are satisfied, configured systems can use SNMP-SET for the UPS and an authenticated host agent to shut Windows or Linux servers down in order.
The readings land in one bilingual fleet view with history charts, CSV export, battery replacement planning and grouped email alerts. Same view, every supported brand.
View supported UPS equipment together.
Tell us how many UPS units you run and where they are. You get a written proposal for your fleet, not a rate card that fits nobody.
It runs on your own network, and monitoring and shutdown never depend on anything outside it. There is also an optional Cloud portal, in limited beta, that puts several sites on one screen: read-only, hosted in Quebec, and off until you switch it on. Your sites behave the same whether you use it or not.
Windows and Linux, including Docker on Linux. The optional agent that shuts your servers down in order runs on Windows and Linux too.